USB to TTL CH340 Converter – FTDI Programmer
USB to TTL CH340 Module Features :
- Variable output voltage setting: 5v and 3.3v.
- Output Pins: DTR, Tx, Rx, Vcc, CTX, GND.
- CH340G Converter.
- Supported Systems: WIN2000/WINXP/WIN7/WIN8/MAC/LINUX
- Standard USB Driver: VCP Drivers
The Serial Converter module is perfect for those trying to get into the Arduino Pro Mini. This particular module features the CH340G USB to UART Converter. In addition to being compatible with all the Arduinos, this serial converter is capable of sourcing 5v or 3.3v for different versions of micro controllers.
In order to use a TTL converter, a driver must be installed. The compatible driver for this module can be found through the “References” section below.
FTDI Hardware Connections
FTDI (USB) ——– Arduino
DTR ———- DTR
TXO ———- RXI
RXI ———- TXO
3V3 ———- +5 V (if FTDI Basic is set to 5 V and **if** Powered via USB)
GND ———- GND (If powered via USB)
We’ve put together a few references for this product!